- GENDAN ENGINECHECK DRIVERS
- GENDAN ENGINECHECK MANUAL
- GENDAN ENGINECHECK SOFTWARE
- GENDAN ENGINECHECK CODE
GENDAN ENGINECHECK CODE
Foradditional code definitions, please visit our online reference library: Print report buttonPrint or save a report of the fault codes read from the moduleįault code definitionsVauxCheck contains thousands of fault code definitions. fuel trim settings) andalso the on-board tests back to not complete.Over the next few drive cycles, the car will re-run its on-boardtests, and will relearn the fuelling settings etc. Refresh buttonThis will retrieve the latest information from the carĬlear codes buttonReset the engine-management system and clear the faultcodes.This will switch the Check Engine light off, and will clear anylearned values within the ECU (e.g. A fault has occurred, but the carmay need to see it occur over anumber of drive cycles before it willlog a stored code Pending codes codes that the car is keeping an eyeon. Stored codes codes indicating faults found by thecar Refresh or Clear Codes not workingSome cars can drop the connection, preventing theClear codes or Refresh buttons working.If this happens, change the Connection setting toHold Connection and click the Connect buttonagain to reconnect.įault codesThe fault codes tab will display the fault codes read from the engine-management system on the car.
GENDAN ENGINECHECK SOFTWARE
If you cannot establish a connection, and the car is listed on ourwebsite as being compatible, please contact us with the from a carThe software will automatically disconnect from the car once it hasread the fault codes. Please also trydisconnecting and reconnecting the interface from the car. Try theconnection again with the engine running. If the connection does not complete, please ensure that the settingson the page are correct, and that the car ignition is on. You can then switch to the other tabs to view faultcodes. The status window willdisplay connection progress.If all goes well, you should see that the status of the variousconnection phases being displayed, and you will be left with a statusof Complete. Select the correct baud rate (leave this set to 38,400bps unlessyour interface has been specifically set to 9,600bps)Ĭlick ConnectThe connection process will then begin.
GENDAN ENGINECHECK MANUAL
Select the Connection tab In the dropdown, select the correct COM port for your PCconnection (your interface instructions and PC manual shouldhelp you identify this) Shows current connection settings (PC port and diagnosticsinterface) and current unit selection (Metric or Imperial)įault codes tabLists stored and pending fault codes, along with theirdefinitions (where available)ĮCU information tabECU details (where available)Ĭonnecting to a carTo connect to a car: Ensure that the ELM327 interface is securely connected to thePC and to the car, and that the car ignition is on (or the engine isrunning). Using VauxCheckYou can navigate through the software by clicking on the labelledtabs.Connection tab The activation window will appear:Enter your details and clickActivate
GENDAN ENGINECHECK DRIVERS
Thank you for purchasing the VauxCheck software from Gendan.This document aims to be a quick guide to using the VauxCheck software.If you require more information, please contact welcome email will include information on downloading theVauxCheck softwareOnce you have downloaded the installation file, double-click on it tobegin the Installation.Follow the on-screen instructions to complete the installation.Before running the VauxCheck software, please ensure that youhave connected the diagnostics interface to your PC (and haveinstalled the drivers per the instructions, if required).ĪctivationThe first time you run the software, you will be required to enter youractivation details these details will be in your welcome email.PLEASE NOTE: the activation details are case-sensitive, so must beentered exactly as shown on the activation email.Double click the VauxCheck icon, or selectStart->Programs->VauxCheck->VauxCheck from theWindows Start menu. VauxCheck QuickstartMarch 2007 version 1.2
0 kommentar(er)
